Download Stock Rom Samsung Galaxy XCover GT-S5690
Sabtu, 10 November 2018
Edit
Romphe | Samsung Galaxy XCover GT-S5690 On this occasion I will share about flashing Samsung Galaxy XCover GT-S5690 was flashing is not too difficult as long as mmcnya not damaged and usbnya place is not damaged too, on the smartphone Samsung Galaxy XCover GT-S5690 because most people who Flashing failure is at the time of incorrect firmware selection and make the Samsung running on flashing but can not live again as the original bootlop or can be said continue resart Samsung Galaxy XCover GT-S5690 on this occasion jagan kwatir you can flashing yourself with Computer itself provided you can download the first application below only requires 3 files only.
Link Download :
Mobile : Galaxy XCover
Model : GT-S5690
System Version : Gingerbread 2.3.6
Baseband : XEF S5690XXMA1
Download (AFH) : Samsung Galaxy XCover GT-S5690
Download : Samsung Galaxy XCover GT-S5690
Download : Samsung Galaxy XCover GT-S5690
Still in flash don't forget flash tool named Odin can you guys downloaded below according to your needs you guys already completed stay just select below.
SAMSUNG USB Driver : Samsung USB
Steps of Flash Samsung Galaxy XCover GT-S5690
#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.
#3. Live step Next turn off Samsung Galaxy XCover GT-S5690 and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.
#4. Connect your Samsung Galaxy XCover GT-S5690 to Pc using USB cable then automatically detected ID: COM on Odin turns on mobile phone and your PC is connected with Odin.
#5. Lost click PDA / AP on Odin and navigate the file of your firmware extarck result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.
#6. Live directly click START and wait until the process is complete until there is a reading PASS.
#7. If you've survived you have successfully flashing on the Samsung Galaxy XCover GT-S5690 forget to comment well and share if this tutorial useful.
#1. Things that should not be forgotten is Extrack all the files that have been downloaded because it is still in the form of winrar live extrack all is wrong because if it is in the extrack easy to run the application.
#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.
#3. Live step Next turn off Samsung Galaxy XCover GT-S5690 and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.
#4. Connect your Samsung Galaxy XCover GT-S5690 to Pc using USB cable then automatically detected ID: COM on Odin turns on mobile phone and your PC is connected with Odin.
#5. Lost click PDA / AP on Odin and navigate the file of your firmware extarck result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.
#6. Live directly click START and wait until the process is complete until there is a reading PASS.
#7. If you've survived you have successfully flashing on the Samsung Galaxy XCover GT-S5690 forget to comment well and share if this tutorial useful.