Download Stock Rom Samsung Galaxy Trend Lite GT-S7390G
Minggu, 28 Oktober 2018
Edit
On this occasion I will share about the flashing on the Samsung Galaxy Trend Lite GT-S7390G can not be used anymore because the bootlop is not worried, flashing will run well what if you do well and correctly according to below ija ija jagan To forget to pay attention to the flashing because if one step - stepnya it will fail and can not be used again and it is difficult to fix this things - things that need to be noticed before flashing beterai must be in canger first until really full so that flashing runs with good.
Note: I am not responsible if there is damage at the time of flashing because if you do that then I just help through the comments only thank you.
Warning!
If your Samsung Galaxy experience (Boot Loop) can not live anymore, just calm down now turn off your Samsung Galaxy and go into Recovery Mode, just press and hold Volume Up, Home, and Power buttons simultaneously.
In Recovery Mode, Select "Wipe reset data / factory".
After the Data Cache is cleared, select "Reboot System" to restart.
Link Download : Samsung Galaxy Trend Lite GT-S7390G
Steps of Flash Samsung Galaxy Trend Lite GT-S7390G
#1. Things that should not be forgotten is Extrack all the files that have been downloaded because it is still in the form of winrar to live extrack all is wrong because klau already in extrack easy to run the application.
#2. Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.
#3. Live step Next turn off the Samsung Galaxy Trend Lite GT-S7390G and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.
#4. Connect your Samsung Z1 Tizen SM-Z130H to your Pc using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.
#5. Lost click PDA / AP on Odin and navigate the file of your firmware extarck result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.
#6. Live directly click START and wait until the process is complete until there is a reading PASS.